I use my laptop to connect to the wireless connection we have at work. No problems here, I see about 12 wireless networks available, but I need only one, ours.
Recently I bought a PCI wireless card for my PC that I plan to use instead of my laptop.
The problem is that suddenly I see only about 4 of those networks, and most annoying, not the one I need. The new wireless card is working though, I can even connect perfectly to one of those still available.
BTW, with the laptop I can still see the other wireless networks, including the one I need.
I don't think is about drivers, I tried the card on a windows PC with the drivers included on the CD, still no go.
I suppose you already figured out what is my question...are there any standards/compatibility features I consider before buying a wireless card?
What should I look for to make sure I see every network available?
Thanks
Wireless cards...standards or what? Topic is solved
Moderator: jkerr82508
Wireless cards...standards or what?
Last edited by dubigrasu on 28 Nov 2010, 09:37, edited 1 time in total.
Re: Wireless cards...standards or what?
Moved this to the help section since I cannot come up with anything intelligent about it. And I know that our gurus can!
Manjaro 64bit on the main box -Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz and nVidia Corporation GT200b [GeForce GTX 275] (rev a1. + Centos on the server - Arch on the laptop.
"There are no stupid questions - Only stupid answers!"
"There are no stupid questions - Only stupid answers!"
Re: Wireless cards...standards or what?
I would try using an extension cable for the aerial or physically rotating the case and see if that makes a difference - if the aerial is at the back and the router you are trying to connect to is in front of the box then the box could be blocking the signal. A USB wireless adapter may be better especially if is one that comes with a stand on a USB cable.
Past experience demonstrates best method to tighten bolts is to use appropriate size spanners.
Re: Wireless cards...standards or what?
I agree with Joste!
try an extension cable this may solve the problem for you
try an extension cable this may solve the problem for you
registered Linux user number 505431
Amateur radio call sign KC3TEC
miracle (mere-ack-ull) :
the aspiration of the indigent, the expectation of the indolent, and the inspiration of the ignorant.
Im so old even dirt was my apprentice!
Amateur radio call sign KC3TEC
miracle (mere-ack-ull) :
the aspiration of the indigent, the expectation of the indolent, and the inspiration of the ignorant.
Im so old even dirt was my apprentice!
Re: Wireless cards...standards or what?
Well, it has already an aerial connected through a 1 meter cable and the signal is very strong...the router is in the next room.
Anyway, I found some simplified info for dummies like me. http://compnetworking.about.com/cs/wire ... andard.htm
Now that I know what to look for I see that my laptop is using a (Atheros) chipset with 802.11a/b/g standards, while the PC is using a (Ralink) chipset with 802.11g only standard.
From the info above I see that b and g standards are compatible with each other, so maybe my network at work is using the a standard?
I'll see tomorrow.
Thanks
PS, sorry for using the wrong forum section.
Anyway, I found some simplified info for dummies like me. http://compnetworking.about.com/cs/wire ... andard.htm
Now that I know what to look for I see that my laptop is using a (Atheros) chipset with 802.11a/b/g standards, while the PC is using a (Ralink) chipset with 802.11g only standard.
From the info above I see that b and g standards are compatible with each other, so maybe my network at work is using the a standard?
I'll see tomorrow.
Thanks
PS, sorry for using the wrong forum section.
Re: Wireless cards...standards or what? Topic is solved
Ah, the problem is solved without me even lifting a finger.
It just happens that the old router was changed yesterday and now I can see the needed network.
I still don't know what was the cause (some networks still don't show) but who cares, I have what I need.
Cheers everyone
It just happens that the old router was changed yesterday and now I can see the needed network.
I still don't know what was the cause (some networks still don't show) but who cares, I have what I need.
Cheers everyone
Re: Wireless cards...standards or what? Solved
Yeah I have it like that a lot. I finally get everything working and I have no clue what I did
Manjaro 64bit on the main box -Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz and nVidia Corporation GT200b [GeForce GTX 275] (rev a1. + Centos on the server - Arch on the laptop.
"There are no stupid questions - Only stupid answers!"
"There are no stupid questions - Only stupid answers!"
- dedanna1029
- Sound-Berserk
- Posts: 8780
- Joined: 14 Mar 2010, 20:29
- Contact:
Re: Wireless cards...standards or what? Solved
I do the same LOL.
I'd rather be a free person who fears terrorists, than be a "safe" person who fears the government.
No gods, no masters.
"A druid is by nature anarchistic, that is, submits to no one."
http://uk.druidcollege.org/faqs.html
No gods, no masters.
"A druid is by nature anarchistic, that is, submits to no one."
http://uk.druidcollege.org/faqs.html
Re: Wireless cards...standards or what?
dubigrasu wrote:I still don't know what was the cause (some networks still don't show) but who cares, I have what I need.
I had a similar problem and was with an 802.1 B Standard NIC. Linux or MS had the same screwed up issues.
The problem was worse with 802.1 A type routers. 802.1B is supposed to be compatible with A and B Routers.
I think when they came with 802.1 N and up it fixed the issue.